Using the successful completion of OSHA’s Stand Down for Basic safety event the other day, I’m sure there will be much more people searching for fall protection equipment. If you are, it might mix your brain to take a peek through the neighborhood classifieds to see when you can find much on some “slightly used but not abused” products, such as harnesses, lanyards, and maybe even an SRL.
Good idea? In the end, if the gear looks good and seems to work, it should be just fine, right? Not fast.
A GOOD DEAL GONE BAD
Let’s say you will find a fall protection equipment. It appears good, does not have any frayed or cut webbing, and, by golly, the impact signal is still unchanged. Best of all, the person is selling it for half the original price, not bad! But prior to going laying out your hard-earned cash, consider the next: you have NO idea what that harness has been subjected to. None. No. Nada. Zip. The dude says he scarcely even wore it, but how about the guy before him? Who knows how many users the harness has had and how they took good care of it? Perhaps the thing has been sitting out in sunlight, being strike with UV rays (rendering it potentially brittle) day in and day trip – you think he’ll let you know that?
And how about the impact indication?
It isn’t deployed so … Read the rest..
Falls are the leading cause of death and injury in construction. More than 828 workplaces deaths in private construction as reported by Bureau of Labor Statistic during 2015 and 36% of this were caused by fall from heights. This is equally troubling that fall protection equipment is again the Occupation Safety and Health Administration (OSHA) most cited standard in worksite inspection.
It’s very easy to see how personal fall protection equipment can help you.
Correct Equipment for Our body is our greatest asset, bar none
This is why you should do everything to protect it. Now, we don’t have to wear this equipment every day. After all, it would be very hard to enjoy life if you’re going to be paranoid. However, there are instances when they are must-haves and non-negotiable.
These are the instances that you should wear fall protection equipment because wearing it is the safe and logical thing to do. This would usually depend on your job or what you’re doing. However, it’s good to know what these instances are.
This way, you’ll be able to know how the equipment can help you. So here are just some of the ways on how it can help you:
The collect Fall Arrest Equipment
For a fall to be arrested in a controlled manner, it is of utmost importance that there is enough energy absorption capacity within the fall arrest system. If the energy absorption being present … Read the rest..
Providing proper tools and training for fall protection on finished residential buildings is a challenge, but it’s necessary, and with the right equipment and information/education it’s certainly possible to provide the appropriate fall protection.
While other industries have come to the realization that working at height without protection is one of the most dangerous things done at worksites — leading them to implement complex fall protection plans, prove thorough training for workers, and demand customized fall arrest systems unique to a particular industry’s needs — there has been little headway in providing personal fall protection for workers working on finished residential homes. Read more at http://www.masonrymagazine.com/7-02/prevention.html
One reason people disregard fall protection on finished residential homes is that many people frequently do similar jobs themselves, e.g., patching roofs, cleaning gutters, and hanging Christmas lights. This familiarity and nonchalance with working at heights are a reason fall hazards often go unnoticed in the established residential sector. Another reason is that legislators and enforcement agencies like OSHA have not pushed for better regulation like they have in the construction industry, which has strict standards for personal protective and personal fall arrest equipment. A final reason is that proper tools and systems haven’t been developed or aren’t readily available for setup and protection when working at heights. Click here to read more info about fall protection.
Looking Toward the Future
One improvement in fall protection on finished residential homes would be building codes … Read the rest..
Fall arrest and lifeline roof anchors are specifically designed for providing fall protection to workers whose jobs involve, for example, exterior work on buildings and similar structures. Properly made safety equipment, including fall arrest anchors, will prevent falls and consequent injuries in the workplace.Click here to read more info about fall arrest system.
It’s important to note that thorough training is required for employees that will be performing their duties at heights as a result of the hazardous environments where they will be working, and employers are required to have proper fall protection policies. After fall arrest systems are installed, all staff members should receive hands-on training regarding the use of fall prevention equipment. Read more at http://www.weldingoutfitter.com/
Roof-mounted tieback anchors are a critical component of any four-step personal fall arrest system — anchorage, full-body harness, safety lanyard or lifeline, and deceleration device — and must adhere to OSHA regulations. Tieback anchors are required for all workers requiring rope skills to access work areas.
Roof repairs, painting jobs, and window washing services all require a comprehensive safety system because they involve a suspension. In addition to absorbing loads as part of a personal fall arrest system, single-point anchors enable workers to negotiate corners and three-way intersections. The chief use of roof-mounted tiebacks is for single-point tie-offs and horizontal lifeline usage for rope access. There are anchors for temporary or permanent installation designed for both flat and pitched roofs that … Read the rest..
Thousands of people don’t realize the important of fall protection equipment even though many require this for work. Each year there are hundreds, if not thousands of accidents occur and there are several hundred deaths also. That is a staggering amount of deaths and the number of people injured reaches into the tens of thousands but unfortunately building sites are always dangerous. One of the biggest concerns is with people falling to their deaths; so how can fall protection equipment help you stay safe?
Accidents Can Occur At Any Time
Fall protection equipment can be very help to you simply because they can keep you safe. You may not always find a good foothold and it can lead you to fall and in general a lot of accidents can occur during construction. However, fall protection equipment can help to reduce the risks and keep you a lot safer even if you lose your footing. Accidents happen all the time and in most cases, they are unexpected and very deadly but using safety equipment can help prevent more accidents from occurring. Click here to read more info about fall protection equipment.
Fall Protection Anchors Can Protect You from Falling
Anyone who has experience working on a tall building under construction will know and understand the risks. There will be risks from falling off beams and even falling over the side of a roof when completing basic tasks around the building and … Read the rest..